ar5418g001002dd

Change crimping set and positioner at the crimper

Typ ar · téma 54.18 · verze 0100 · 2016-11-25

Platí pro: Model 000.001

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 54 Elektrické zařízení, výstroj a přístroje › 54.18 Kabelové svazky — Řada 000 (modely 001)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.25 Hlavní kabelový svazek › 25.25.40 Propojovací díl — Řada 000 (modely 001)

AR54.18-G-0010-02DD

Change crimping set and positioner at the crimper

Model

000.001

Change crimping set and positioner at the crimper
Change crimping set and positioner at the crimper

930 589 00 99 00

Supplemental truck wiring harness repair kit

000 589 13 99 00

Wiring harness repair kit, basic

Change crimping set and positioner at the crimper

  Change crimping dies (3, 4)

1

 Close crimper (2) and remove screws/bolts (1) completely.



2

 Press crimper (2) all the way until it opens automatically and remove the  crimping dies (3, 4).


W54.18-1040-11

Change crimping set and positioner at the crimper

3

Insert corresponding  crimping dies (3, 4) into the open  crimper (2).


The marks (arrows) on the  crimping dies (3, 4) must align with the marks (arrows) on the  crimper (2).



4

Close  crimper (2) and tighten  crimping dies (3, 4).


W54.18-1041-03

Change crimping set and positioner at the crimper

  Change positioner (5)

5

Pull off  positioner (5) from bracket (6) and change.


The magnet (7) of  positioner (5) must point downward.


W54.18-1042-11