Removing and installing fuse and relay box

AR54.15-P-1255EA

Removing and installing fuse and relay box

12.7.94

 

Removal, installation

1

Disconnect ground cable at the battery

AR54.10-P-0003A

2

Remove cover of fuse box (1)

Examine gasket for signs of damage

3

Remove screws (2)

4

Remove cover of relay box (3)

Check gasket for damage

5

Unscrew screw (4)

6

Remove fuse boxes (F1/1, F2 and F3) and disconnect

7

Disconnect leads on fuse boxes or fuse blocks

 Disconnect leads only when changing entire fuse and relay box. To avoid mix-ups bind disconnected leads for individual fuse boxes or blocks together and mark.

AR54.15-P-1255-01EA

Connect leads to fuse boxes or fuse blocks

AR54.15-P-1255-02EA



Fuse block assignment and lead connections

GF54.15-P-1255EB

8

Disconnect all relays

 Relay holder assignment

AR54.15-P-1255-03EA

9

Remove exterior lamps failure monitoring unit

 Press catch strap

10

Remove relay holder

11

Unclip connectors on bottom of relay holder or carrier

12

Remove connectors for exterior lamp failure monitoring module

AR54.15-P-1255-04EA

Install connectors for exterior lamp failure monitoring module

AR54.15-P-1255-05EA

13

Unscrew nuts (7)

14

Remove fuse and relay box (F1)

 Check gasket for damage

15

Reinstall in opposite order