1 | Prism |
2 | Hinged lid |
3 | Adjustment screw |
4 | Eyepiece |
5 | Refractometer |
A | Brix scale |
B | AdBlue® scale |
W14.40-1417-06
Warning | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
Notes on use, material properties and handling of AdBlue® | |||
| Check | ||
1 | Adjust refractometer (5) to determine the AdBlue® concentration. | ||
| 000 588 08 21 00 Test and measuring kit | ||
2 | Remove a small amount of AdBlue® from the AdBlue® container with a siphon. | See information from body manufacturer | |
3 | Place one to two drops of AdBlue® on the prism (1) of the refractometer (5). | | |
Closing the hinged lid (2) causes the AdBlue® to be distributed evenly. | |||
4 | See through the eyepiece (4) against a light background. | Bring scales into focus by turning eyepiece (4). | |
5 | Read off measurement value at the light/dark boundary of the AdBlue® scale (B). | NOx reducing agent urea content | |
If the AdBlue® concentration is less than the specified urea concentration, | |||
| |||
replace AdBlue®. | |||
6 | Carefully clean any AdBlue® residues from the prism (1) and the hinged lid (2). | | |
Only water without any addition of cleaning agent should be used to clean. |
Odkazované dokumenty
- ah1440n000101a Upozornění k použití, vlastnostem a manipulaci s AdBlue
- ar4920g926401ch
- as1440z000101a Nebezpečí popálení a opaření při práci na potrubích AdBlue a s nimi spojených součástech.Nebezpečí poranění kůže a očí při zacházení s AdBlue. Nebezpečí otravy při požití AdBlue
- ws1400p0012b