ar4920g1090ch

Remove/install magnetic adapter at filler neck of AdBlue(R) tank

Typ ar · téma 49.20 · verze 0101 · 2018-08-11

Platí pro: Engine 457.9, 458.9, 541.9, 542.9, 941.9, 942.9 in model 000.001 with BlueTec

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 49 Výfukový systém, čistění výfukových plynů › 49.20 Dodatečná úprava výfukových plynů — Řada 000 (modely 001) · Řada 942 (modely 9**)

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.53 Nádrže/plnicí zařízení — Řada 000 (modely 001) · Řada 942 (modely 9**)

Platí také pro motory/převodovky: 457 9**, 458 9**, 541 9**, 542 9**, 941 9**

AR49.20-G-1090CH

Remove/install magnetic adapter at filler neck of AdBlue(R) tank

10.08.2018

Engine

457.9, 458.9, 541.9, 542.9, 941.9, 942.9 in model 000.001

with BlueTec

Remove/install magnetic adapter at filler neck of AdBlue(R) tank

W14.40-1472-08

1

Holes

4

Screwdriver

7

Magnetic adapter

2

Fastening hook

5

Assembly aid

3

Cover

6

AdBlue® tank

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

Remove

1

Unscrew cap (3) of the AdBlue® container (6).

2

Insert assembly aid (5) into the bores (1).

Assembly aid for removal/installation of magnetic adapter at AdBlue(R) tank filler neck

WF58.50-W-1440-01A

3

With two screwdrivers (4), press the fastening hooks (2) inward in the direction of the arrow and displace assembly aid (5) up to the end stop.

4

Pull out magnetic adapter (7).

Install

5

Press together the fastening hooks (2) by hand and insert assembly aid (5) up to end stop into the bores (1).

Assembly aid for removing/installing the magnet adapters on the filler neck of the AdBlue® container

WF58.50-W-1440-01A

6

Insert magnetic adapter (7) up to end stop into the filler neck of the AdBlue® container (6).

7

Hold magnetic adapter (7) and pull out assembly aid (5).

When pulling out the assembly aid (5), the fastening hooks (2) engage audibly.

8

Screw on cap (3) of the AdBlue® container (6).

Odkazované dokumenty