ar4920b3002evi

Read out and send control unit log of exhaust gas aftertreatment control unit (ACM)

Typ ar · téma 49.20 · verze 0100 · 2018-09-04

Platí pro: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 49 Výfukový systém, čistění výfukových plynů › 49.20 Dodatečná úprava výfukových plynů — Řada 382 (modely 155, 189) · Řada 936 (modely 9**)

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.11 Řídicí jednotka/relé — Řada 382 (modely 155, 189) · Řada 936 (modely 9**)

AR49.20-B-3002EVI

Read out and send control unit log of exhaust gas aftertreatment control unit (ACM)

20.08.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Read the protocol of the control unit

1

Connect the diagnosis system, start the XENTRY, and turn the ignition on

2

Connect the flash drive to one USB port of the XENTRY tablet

3

Read the protocols of the control units on the XENTRY Diagnosis

To do that, select the following options from the menu:
ACM - exhaust gas after-treatment (A60)
Adjustments
Transmissions of the parameter data
Reading of parameter data of the control unit

After finishing the reading, the entry field will automatically be filled up, but it can be manually altered.

If a manual alteration is performed, next, the signal must be activated again. Make sure to select the connected flash drive as storing place.

Transmit the protocols of the control units

4

Connect the flash drive to a computer with access to the TIPS, and attach the file generated by the XENTRY with the extension ".cod" to the respective TIPS matter

5

Finish the XENTRY and disconnect the diagnosis system