ar4920b2057evi

Remove/install pressure limiting valve of pump module

Typ ar · téma 49.20 · verze 0100 · 2018-11-08

Platí pro: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 49 Výfukový systém, čistění výfukových plynů › 49.20 Dodatečná úprava výfukových plynů — Řada 382 (modely 155, 189) · Řada 936 (modely 9**)

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.13 Potrubí/hadice/ventil — Řada 382 (modely 155, 189) · Řada 936 (modely 9**)

AR49.20-B-2057EVI

Remove/install pressure limiting valve of pump module

23.10.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Remove/install pressure limiting valve of pump module

B49.20-A000-09

1

Pump module

4

Screw plug

7

Tool (It lies with the spare part)

2

Support

5

Hole

8

Electric connection

3

Piping

6

Pressure regulating valve

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

Remove

1

Remove the piping (3) from the pump module (1)

2

Remove the electric connection (8)

3

Remove the pump module (1) from the support (2)

4

Remove the threaded plug (4)

When removing the threaded plug (4), a little amount of AdBlue® can flow out.

5

Screw the threaded end of the tool (7) in the pressure limiting valve (6), extracting it in this way

When removing the pressure limiting valve (6), little amount of fluid can flow out.

Install

6

Insert the new pressure limiting valve (6) with the thick side of the tool (7)


Take care not to enter any dirt in the hole (5),
otherwise, the pump module (1) can be damaged.

7

Screw the new threaded plug (4)

Closing screw in the pump module

*BA49.20-B-1018-02EVI

8

Install the pump module (1) in the support (2)

Pump module in the bracket

*BA49.20-B-1014-02EVI

9

Install the electric connection (8)

10

Fix the piping (3) of the module pump (1) on the support (2) with new cable flexible ties

Exhaust gas aftertreatment, BlueTec(R)

Number

Designation

Engine 936.9 in the Type 382.155/189 with Code MS6 (Euro VI)

BA49.20-B-1014-02EVI

Pump module in the bracket

Nm

60

Exhaust gas aftertreatment, BlueTec(R)

Number

Designation

Engine 936.9 in the Type 382.155/189 with Code MS6 (Euro VI)

BA49.20-B-1018-02EVI

Closing screw in the pump module

Nm

5

Odkazované dokumenty