Remove/install exhaust pressure sensor upstream of diesel oxidation catalytic converter

AR49.20-B-1000EVI

Remove/install exhaust pressure sensor upstream of diesel oxidation catalytic converter

23.08.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

1

Exhaust gas after-treatment unit

4

Bushing of the sensor

B37

Exhaust gas pressure sensor before the diesel oxidation catalyst

2

Hollow screw

5

Electrical connector

3

Nut

6

Pressure tubes

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A



Remove

1

Turn off ignition

2

Disconnect the electric connector (5)

3

Remove the exhaust gas pressure sensor before the diesel oxidation catalytic converter (B37) on the bushing of the sensor (4)



Install

4

Screw in the hollow screw (2) and remove the pressure piping (6) on the bushing of the sensor (4)

5

Loosen the nut (3) to make possible loosening the bushing of the sensor (4) on the bracket

6

Lubricate the screw of the exhaust gas pressure sensor before the diesel oxidation catalyst (B37)

Paste, hot lubrication 100 g DBL 6879.20

*BR00.45-Z-1103-06A

7

Install the diesel catalyst sensor before the diesel oxidation catalyst (B37) on the bushing of the sensor (4)

 Exhaust gas pressure sensor on connecting nozzle

*BA49.10-B-1005-02EVI

8

Connect the electric connector (5)

9

Align the electric connector (5) with the wiring harness (4) by turning the wiring harness

10

Install the pressure piping (6) on the bushing of the sensor (4)

 Pressure line on connection nozzle

*BA49.10-B-1029-02EVI

11

Close/tighten the nut (3) to make possible installing the bushing of the sensor (4) on the bracket

 Connection nozzle on holder

*BA49.10-B-1030-02EVI

 Exhaust system

Number

Designation

ENGINE 936.9

BA49.10-B-1005-02EVI

Exhaust gas pressure sensor on connecting nozzle

Nm

25

 Exhaust system

Number

Designation

ENGINE 936.9

BA49.10-B-1029-02EVI

Pressure line on connection nozzle

Nm

12

 Exhaust system

Number

Designation

ENGINE 936.9

BA49.10-B-1030-02EVI

Connection nozzle on holder

M24

Nm

40

Repair materials

Number

Designation

Order number

BR00.45-Z-1103-06A

Paste, hot lubrication 100 g DBL 6879.20

A 000 989 76 51 11