S49.10-2501-09
1 Clip
2 Rear exhaust system
3 Front exhaust system
4 Rubber silent block
9 Plug of oxygen sensor
10 Exhaust manifold
11 Rubber silent block
5 Clip
6 Catalytic converter
7 Rubber silent block
8 Electrical line for oxygen sensor
| Remove/install | ||
1 | Remove clamp (1) for fastening exhaust system at the rear (2) to the exhaust system at the front (3) | | |
2 | Remove rubber silent block (4) for exhaust system at the rear (2) | ||
3 | Remove exhaust system at the rear (2) | ||
4 | Remove clamp (5) for fastening exhaust system at the rear (3) to the CAT (6) | | |
5 | Remove rubber silent block (7) exhaust system at the front | ||
6 | Remove front exhaust system (3) | ||
7 | Remove mounting clamps on the electrical line (8) for the oxygen sensor | | |
8 | Detach oxygen sensor connector (9) | ||
9 | Unscrew nuts at exhaust manifold (10). | | |
10 | Remove rubber silent block (11) for the CAT (6) | ||
11 | Remove three-way catalytic converter (6) | ||
12 | Install in the reverse order |
Oxygen sensor
Exhaust manifold
Exhaust system