ar4910p7280tk

Remove / install exhaust system from flange connection

Typ ar · téma 49.10 · verze 0107 · 2011-11-09

Platí pro: ENGINES 271 in MODEL 211

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 49 Výfukový systém, čistění výfukových plynů › 49.10 Výfuková potrubí, katalyzátor, tlumič výfuku — Řada 211

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.41 Sběrač/trubka/tlumič výfuku/hadice pro odvod výfukových plynů — Řada 211

Platí také pro motory/převodovky: 271 ***

AR49.10-P-7280TK

Remove / install exhaust system from flange connection

21.10.11

ENGINES 271 in MODEL 211

Remove / install exhaust system from flange connection

P49.10-2256-08

1 Front exhaust system

2 Bolts

5 Exhaust rubber mount

159 Center muffler

3 Gasket

4 Rear exhaust system

Remove/install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses.

AS00.00-Z-0002-01A

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Raise vehicle with vehicle lift

AR00.60-P-1000T

2

Detach center muffler (159) from front exhaust system (1), for this step unscrew bolts (2)

Installation: Clean connecting points free of combustion and corrosion residues. Replace seal (3) and bolts (2).

*BA49.10-P-1006-01K

3

Support rear exhaust system (4) with transmission jack and transmission platform

Transmission jack
gotis://H_00.10_01.0

Transmission plate for passenger cars and commercial vehicles
gotis://A_25/35/49_02.0

4

Unhinge rear exhaust system (4) from exhaust rubber mounts (5)

Use liquid lubricant if necessary.

Installation: Check exhaust rubber mount (5) for wear, replace if required.

*BA49.10-P-1008-01K

Lubricant paste

*BR00.45-Z-1002-06A

5

Lower rear exhaust system (4)

6

Install in the reverse order

Checking

7

Check installation position and clearance of exhaust system

The exhaust system must be mounted free of tension, align exhaust system if required.

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Test run engine and check exhaust system for leaks

Exhaust system

Number

Designation

Engine
271
in model 211

BA49.10-P-1006-01K

Bolt connecting front exhaust system to center muffler

Nm

20

BA49.10-P-1008-01K

Nut connecting exhaust rubber mount to frame floor

Nm

20

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Antifriction paste, rubber parts 2.5 kg, DB supply specification 6867.00

A 000 989 01 60

Odkazované dokumenty