AR49.10-P-7280FA | Remove / install exhaust system from flange connection | 13.2.06 |
ENGINE 104.943 /991, 119.97, 120.98 in MODEL 129
P49.10-0235-09
| Remove/install | ||
1 | Disconnect bolted connection (9c, 9d) | | |
2 | Replace 3-hole full face gasket (9b) | Pay attention to the correct installation position! | |
3 | Unhook rear muffler (9) from rubber ring (18) | ||
4 | Remove left frame cross strut (36). | Replace self-locking screws | |
5 | Disconnect bolted connection (8) | | |
6 | Detach suspension plate (25) and clamping plate (26) | ||
7 | Remove center muffler (7) | ||
| Checking | ||
8 | Check sintered seal (5), flange (5a), graphite sealing ring (5b) for reusability | Replace if necessary. Pay attention to the correct installation position! | |
9 | Check suspension plate (25), rubber buffer (13) and rubber ring (18) | Replace, if necessary. | |
10 | Install in the reverse order |
Exhaust system
Number | Designation | Engine | Engine | |
BA49.10-P-1002-01A | Bolt, flange connection to exhaust pipe | Nm | 20 | 20 |
Frame floor assembly
Number | Designation | Model 129 | |
BA61.10-P-1001-01A | Self-locking bolt connecting rear cross strut to frame floor | Nm | 120 |
Commercially available tools