P49.10-2921-06
Shown on engine 132.910
1 Rear muffler
2 Rear apron
3 Retaining rubber
4 Bolts
5 Heat shield (engine 132.910)
6 Bolt (engine 132.910)
7 Gasket
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Raise vehicle with vehicle lift | ||
2 | Remove rear apron (2) | ||
3 | Unscrew bolt (6) from heat shield (5) | Engine 132.910 | |
4 | Remove bolts (4) | | |
5 | Unhook rear muffler (1) from rubber retainers (3) and remove rear muffler (1) with seal (7) | Installation: Replace seal (7). | |
6 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
7 | Conduct engine test run and check exhaust system around the rear muffler (1) for leaks |
Exhaust system
Odkazované dokumenty
- ar8830p0502mcc
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru
- as0000z001001a Nebezpečí ohrožení života v případě sesunutí nebo překlopení vozu z dílenského zvedáku