ar4750g0140h

Remove/install fuel temperature sensor

Typ ar · téma 47.50 · verze 0102 · 2018-08-14

Platí pro: Engine 471.9## ## up to 032690 in model 800.310/320

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 47 Palivová soustava, přívod energie hnacího řetězce › 47.50 Čidla, snímače, senzory — Řada 471 (modely 9**) · Řada 800 (modely 310, 320)

EinPAS 16 Zásobování motoru palivem/energií › 16.10 Zásobování palivem › 16.10.12 Snímač/spínač/kabelový svazek — Řada 471 (modely 9**) · Řada 800 (modely 310, 320)

AR47.50-G-0140H

Remove/install fuel temperature sensor

08.08.2018

Engine

471.9## ## up to 032690 in model 800.310/320

Remove/install fuel temperature sensor

W47.50-1033-09

1

Fuel filter module

2

Electrical connector

B602

Fuel temperature sensor

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Remove/install

1

Clean engine in the area of the fuel filter module (1)

2

Drain fuel at fuel filter module (1)

AR07.03-G-1460-03H

Allow escaping fuel to drain into a suitable container.

3

Disconnect electrical connection (2)

4

Remove fuel temperature sensor (B602) on fuel filter module (1)

Installation: Replace sealing ring.

Fuel temperature sensor on fuel filter module

*BA47.50-N-1002-01B

Socket wrench bit

*001589790900

5

Install in the reverse order

6

Fill fuel low-pressure circuit on engine

AR07.16-G-1007H

7

Start engine and perform an engine test run

Allow engine to run at a higher rotational speed.

If engine fails to start or only runs for a brief period.

Fill fuel low-pressure circuit again on engine.


AR07.16-G-1007H

8

Turn off the engine and check in area around the fuel filter module (1) for leaktightness

Visual inspection.

Sensors, transmitters

Number

Designation

Engine 471.9## ## up to 032690

BA47.50-N-1002-01B

Fuel temperature sensor on fuel filter module

Nm

30

Remove/install fuel temperature sensor

001 589 79 09 00

Socket wrench bit

Odkazované dokumenty