ar4721t5621bb

Removing/installing the fuel heat exchanger

Typ ar · téma 47.21 · verze 0103 · 2005-07-12

Platí pro: ENGINE 457.941 in modelNMB613.368 ENGINE 457.942 in MODELS NMB671.015 /020 /021 /030 /042 /332 /333 ENGINE 457.944 in MODELS NMB613.358 /367 /388

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 47 Palivová soustava, přívod energie hnacího řetězce › 47.21 Předehřev paliva — Řada 613 (modely 358, 367, 368, 388) · Řada 671 (modely 015, 020, 021, 030, 042, 332, 333)

EinPAS 16 Zásobování motoru palivem/energií › 16.10 Zásobování palivem › 16.10.60 Předehřev/chlazení — Řada 613 (modely 358, 367, 368, 388) · Řada 671 (modely 015, 020, 021, 030, 042, 332, 333)

Platí také pro motory/převodovky: 457 941, 457 942, 457 944

AR47.21-T-5621BB

Removing/installing the fuel heat exchanger

22.3.01

ENGINE 457.941 in modelNMB613.368

ENGINE 457.942 in MODELS NMB671.015 /020 /021 /030 /042 /332 /333

ENGINE 457.944 in MODELS NMB613.358 /367 /388

Removing/installing the fuel heat exchanger

T47.21-0002-11

Shown on engine 457.944

1 Fuel heat exchanger

2 Bolt

3 Banjo bolt

4 Sealing ring

5 Fuel pipe

Removing/installing

1.1

Detach lower engine compartment paneling

For model 613.358/388

AR61.20-T-1105B

in case of MODEL 613.367

AR61.20-T-1105CA

1.2

Remove interior flap above engine

in case of MODEL 671

AR88.40-T-1100-03AA

For model 613.368, see owner's manual.

Danger!

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel.

No fire, sparks, open flames or smoking.
Only pour fuels into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

2

Detach fuel lines (5)

Collect fuel which flows out.

Installation: Install new sealing rings (4).

*BA47.25-N-1009-01H

3

Unbolt fuel heat exchanger (1)

The fuel heat exchanger must not be disassembled.

*BA07.15-N-1001-01C

4

Install in reverse order

5

Bleed fuel system

For model 613.358/388

AP47.00-T-1720-01BB

For model 613.367/368

AP47.00-T-1720-01CA

in case of MODEL 671

AP47.00-T-1720-01AA

Checking

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

6

Start engine and inspect fuel system for leaks

If the engine does not start within 30 s,

wait 1 min. and repeat attempt at starting.

Diesel injection system with unit pumps (MR/PLD)

Number

Designation

Engine 457.9

BA07.15-N-1001-01C

Bolt for fuel heat exchanger on MR/PLD control unit

Nm

8

Fuel pipes/hoses

Number

Designation

Engine 457.9

BA47.25-N-1009-01H

Banjo bolt for fuel line on fuel heat exchanger

Nm

50

Odkazované dokumenty