ar4710d0006a

Remove/install gas pressure gauge

Typ ar · téma 47.10 · verze 0104 · 2004-04-15

Platí pro: MODELS 902.061 /062, 903.061 /062 /063, 904.062 /063, 902.012 /072, 903.012 /013 /022 /072 /073, 904.012 /013 with ENGINE 111.979 with CODE (MS7) NGT (Natural Gas Transporter) sprinter MODELS 902.661 /662, 903.661 /662 /663, 904.662 /663, 902.612 /672, 903.612 /613 /622 /672 /673, 904.612 /613 with ENGINE 111.984 with CODE (MS7) NGT (Natural Gas Transporter) sprinter

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 47 Palivová soustava, přívod energie hnacího řetězce › 47.10 Palivová nádrž — Řada 902 (modely 012, 061, 062, 072, 612, 661, 662, 672) · Řada 903 (modely 012, 013, 022, 061, 062, 063, 072, 073, 612, 613, 622, 661, 662, 663, 672, 673) · Řada 904 (modely 012, 013, 062, 063, 612, 613, 662, 663)

EinPAS 16 Zásobování motoru palivem/energií › 16.10 Zásobování palivem › 16.10.13 Potrubí/hadice/ventil — Řada 902 (modely 012, 061, 062, 072, 612, 661, 662, 672) · Řada 903 (modely 012, 013, 022, 061, 062, 063, 072, 073, 612, 613, 622, 661, 662, 663, 672, 673) · Řada 904 (modely 012, 013, 062, 063, 612, 613, 662, 663)

Platí také pro motory/převodovky: 111 979, 111 984

AR47.10-D-0006A

Remove/install gas pressure gauge

7.7.98

MODELS 902.061 /062, 903.061 /062 /063, 904.062 /063, 902.012 /072, 903.012 /013 /022 /072 /073, 904.012 /013 with ENGINE 111.979 with CODE (MS7) NGT (Natural Gas Transporter) sprinter

MODELS 902.661 /662, 903.661 /662 /663, 904.662 /663, 902.612 /672, 903.612 /613 /622 /672 /673, 904.612 /613 with ENGINE 111.984 with CODE (MS7) NGT (Natural Gas Transporter) sprinter

Remove/install gas pressure gauge

D47.10-0009-06

Illustration shows Sprinter prior to 2/2000

Components by analogy for Sprinter as of 2/2000

1 Gas pressure gauge

2 High pressure line

Remove/Install

Danger!

Risk of explosion. When working on natural-gas vehicles, escaping natural gas or an overheated compressed-gas tank may result in explosion. Risk of frostbite to body parts from escaping natural gas or contact with components near the valves while draining the compressed-gas tanks. Risk of poisoning or risk of suffocation from inhaling natural gas.

Remove any sources of ignition.

Ensure that the work area is adequately ventilated.

Wear heat-protective gloves.

AS00.00-Z-0018-01A

1

Close gas shutoff valves at compressed-gas tanks

AR47.10-D-0005A

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns while working in the engine during the starting procedure or when the engine is running

Secure vehicle to prevent it from starting on its own.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

2

Start the engine and allow it to run with the vehicle stationary until the engine stops on its own.

Push extraction hose onto exhaust pipe. After engine has stopped, switch ignition off. Gas system is adequately emptied after engine stops.

3

Detach the high-pressure line (2) at the gas pressure gauge (1)

Installation: Tighten the threaded connection of the pipe as instructed.

AR47.25-D-0005A

4

Remove pressure gauge (1)

5

Install in the reverse order

6

Check the high pressure line connection (2) for leaks

Moisten the entire connection with suds and check for the formation of bubbles

Odkazované dokumenty