ar4620w1100zea

Check and adjust hydraulic steering limiter

Typ ar · téma 46.20 · verze 0100 · 2020-03-27

Platí pro: Model 949 with steering gear 765.82 Mercedes-Benz/ThyssenKrupp steering

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 46 Řízení › 46.20 Převodka řízení — Řada 949

EinPAS 22 Řízení › 22.15 Servořízení › 22.15.42 Převodovka řízení/hřídel řízení — Řada 949

Platí také pro motory/převodovky: 765 82*

AR46.20-W-1100ZEA

Check and adjust hydraulic steering limiter

08.11.2019

Model

949 with steering gear 765.82

Mercedes-Benz/ThyssenKrupp steering

Check and adjust hydraulic steering limiter

1

Screw plug

2

Sealing ring

3

Pressure gage

4

Hose

5

Test connection

6

Steering limiter adjustment screw

7

Steering limiter adjustment screw

8

Pressure limiting valve

W46.25-1085-12

Danger

Risk of death caused by vehicle slipping or toppling off during lifting

Only lift vehicle at the lift support points specified by the vehicle manufacturer.

AS00.00-Z-0032-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Warning

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.

Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Warning

Danger of injury to eyes caused by steering oil emerging at high pressure. Danger of poisoning caused by swallowing steering oil

The setting screws for the hydraulic steering limiters must be turned in by at least three rotations. Wear protective gloves, protective clothing and safety glasses.

AS46.00-Z-0001-01A

Warning

Risk of injury from being trapped in the swivel range of steered axles

Ensure that no persons or objects are in the swivel range of all steered axles when turning the steering wheel. Do not stand in the swivel range of the additional steering axle when the engine is running.

AS46.00-Z-0002-01A

Warning

Risk of injury to skin or eyes from hot hydraulic fluid spraying out under high pressure. Risk of burn injuries from contact with components heated by hot hydraulic fluid. Risk of poisoning from swallowing hydraulic fluid

Do not make any technical modifications to the pressure gauge or the test equipment. Check the pressure gauge and test equipment for mechanical damage each time prior to use. Observe the flow diagram when connecting the test equipment. Wear protective gloves, protective clothing and safety glasses.

AS46.00-Z-0003-01A

Warning

Risk of accident and injury caused by diagnostic equipment in vehicle while traveling

Never use the test equipment to verify the delivery rate and oil pressure of the power steering pump or the pressure gauge while driving.

AS58.40-Z-0001-01B

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01B

Topical note

Notes on maintenance and repair work

AH46.20-N-0001-01H

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

Check

1

Load vehicle so as to be as close to primary operating conditions as possible.

In isolated cases, and as a result of the steering kinematics, a front axle load that is too low may result in the steering limitation adjustment pressure not being reached or in adjustment not being possible.

2

Move front wheels to straight-ahead position.

3

Secure vehicle to prevent it moving away.

4

Position front wheels centrally on turn plates.

AR00.60-W-2000-01H

5

Open hood.

AR88.40-W-1000R

6

Unscrew screw plug (1) with sealing ring (2).

Collect escaping oil in suitable container.

7

Install test connection (5).

The test connection (5) can be ordered using part number A 942 351 00 69.

Test connection to steering gear

*BA46.20-N-1015-01FA

8

Connect hose (4) to manometer (3).

Pressure gage

*000589062100

Hose

*400589019100

9

Unscrew cap from test connection (5).

10

Connect hose (4) at test connection (5).

11

Check steering gear oil level and correct if necessary.

Steering gear oil (ATF)

*BF46.00-N-1001-01E

12

Start the engine and allow to run at an engine speed between 1400 and 1500 rpm.

13

Turn steering left or right several times using normal force of the hand until a steering gear oil temperature of approx. 50 °C is reached in the steering.


Only pull against mechanical end stop at steering wheel circumference for a short period of time (max. 5 s).
Otherwise damage could occur to the steering system.

14

Turn steering wheel left up to mechanical end stop using normal force of the hand, read off pressure at manometer (3) and release steering wheel again.


Only pull against mechanical end stop at steering wheel circumference for a short period of time (max. 5 s).
Otherwise damage could occur to the steering system.

15

Note down measured pressure.

16

Turn steering wheel to right up to mechanical end stop using normal force of the hand, read off pressure at manometer (3) and release steering wheel again.


Only pull against mechanical end stop at steering wheel circumference for a short period of time (max. 5 s).
Otherwise damage could occur to the steering system.

17

Note down measured pressure.

18

Move front wheels to straight-ahead position.

19

Switch off engine.

20

Compare noted pressures with specified adjustment pressure.

Adjustment pressure for steering limiter

*BE46.20-N-1001-01FA

If adjustment pressure is outside of tolerance:

Adjust hydraulic steering limiter.


AR46.20-W-1100-01ZEA

Adjustment pressure for steering limiter

*BE46.20-N-1001-01FA

Jam nut of adjustment screw for steering limiter

*BA46.20-N-1008-01FA

Pressure gage

*000589062100

Hose

*400589019100

21

Detach hose (4) from test connection (5).

Collect escaping oil in suitable container.

22

Screw cap onto test connection (5).

23

Detach hose (4) from manometer (3) and seal all connections.

24

Remove test connection (5).

Collect escaping oil in suitable container.

25

Install screw plug (1) with new sealing ring (2).

Test connection screw plug to steering gear

*BA46.20-N-1004-01FA

26

Check steering gear oil level and correct if necessary.

Steering gear oil (ATF)

*BF46.00-N-1001-01E

27

Close hood.

AR88.40-W-1000R

28

Raise vehicle at front axle, remove all turn plates, and lower vehicle back onto floor.

29

Conduct a road test.

During the road test check the overall steering behavior of the vehicle.

30

Check steering gear for leak tightness.

Visual inspection.

Test values for steering gear

Number

Designation

Steering gear 765.82

BE46.20-N-1001-01FA

Adjustment pressure for steering limiter

Specified value

bar

50 (-20)

at engine speed

1/min

1400...1500

Steering gear

Number

Designation

Steering gear 765.82

BA46.20-N-1004-01FA

Test connection screw plug to steering gear

Nm

18

Steering gear

Number

Designation

Steering gear 765.82

BA46.20-N-1008-01FA

Jam nut of adjustment screw for steering limiter

Nm

38

Steering gear

Number

Designation

Steering gear 765.82

BA46.20-N-1015-01FA

Test connection to steering gear

Nm

14

Steering

Number

Designation

Steering gear 765.82 in model 949

BF46.00-N-1001-01E

Steering gear oil (ATF)

Filling capacity

Liter

 4,5

Sheet

BB00.40-P-0236-02A

Sheet

BB00.40-P-0236-03A

Sheet

BB00.40-P-0236-06A

Sheet

BB00.40-P-0236-07A

Check and adjust hydraulic steering limiter
Check and adjust hydraulic steering limiter

400 589 01 91 00

Hose

000 589 06 21 00

Pressure gage

Odkazované dokumenty