Remove/install steering coupling

AR46.10-P-8000RT

Remove/install steering coupling

26.7.07

10.3.06

Bolt, steering coupling to steering shaft

Model 251

*BA46.10-P-1002-01K

 

Remove/install



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Turn steering wheel to central position (front wheels in straight ahead position) and secure with the retaining device

 On a disengaged steering coupling (1) the steering wheel should not be turned because the spiral contact coil will be destroyed.



*129589012100

2

Remove air filter housing

Engine 113

AR09.10-P-1150RT

Engine 156

AR09.10-P-1150GZS

Engine 272, 273

AR09.10-P-1150GZA

Engine 642, left side

AR09.10-P-1150RTB

3

Unscrew bolt (2) from steering coupling (1) to rack-and-pinion steering

 Installation: The bolt (2) must be replaced.



*BA46.10-P-1002-01K

4

Unscrew bolt (3) from steering coupling (1) to steering shaft

 Installation: The bolt (3) must be replaced.



*BA46.10-P-1001-01K

5

Carefully pull steering coupling (1) out of rack-and-pinion steering control valve

 Do not use force (blows from a hammer, strong leverage); if necessary, expand the clamping slot slightly using a screwdriver.

 Installation: Turn rack-and-pinion steering to center position and fit steering coupling (1).

AR46.20-P-0600-01RT

6

Push steering coupling (1) together (arrow) and pull out of steering shaft

 Do not use force as the corrugated tube is sensitive to lateral forces. Enlarge clamping groove a little with a screwdriver if necessary.

7

Install in the reverse order

Number

Designation

Model 251

BA46.10-P-1001-01K

Bolt, steering coupling to steering shaft

Nm

33

BA46.10-P-1002-01K

Bolt, steering coupling to rack-and-pinion steering

Nm

33