ar4610p0200p

Remove/install clock spring contact

Typ ar · téma 46.10 · verze 0202 · 2004-08-25

Platí pro: MODEL 203 up to 30.6.02

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 46 Řízení › 46.10 Volant, sloupek řízení, hřídel sloupku řízení, zámek řízení — Řada 203

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.15 Síť/multifunkční systém › 25.15.18 Spínač/skupina spínačů/ovládací panel — Řada 203

AR46.10-P-0200P

Remove/install clock spring contact

20.12.99

MODEL 203 up to 30.6.02

Remove/install clock spring contact
Remove/install clock spring contact

P46.10-2160-01

32hrs. Securing bolts

A45 Fanfare horns and airbag clock spring contact

N49 Steering angle sensor

P46.10-2159-01

Remove/Install

1

Remove steering wheel

Front wheels in straight-ahead position.

AR46.10-P-0100P

2

Only unscrew the fastening screws (32h) until the fanfare horns and airbag clock spring contact (A45) can be removed

The fastening screws (32h) serve simultaneously as anti-twist protection or assembly aid.

3

Carefully remove the fanfare horns and airbag clock spring contact (A45) from the jacket tube

Installation: Push on the fanfare horns and airbag clock spring contact (A45) as far as the stop

Installation: Do not use any oil or grease, otherwise malfunctions can occur.

Installation: In order to avoid damage to the fanfare horns and airbag clock spring contact (A45) do not install these twisted. If the fanfare horns and airbag clock spring contact (A45) is not in the center position:

Set the clock spring contact to center position

AR46.10-P-0200-01I

Check

4

Check fanfare horns and airbag clock spring contact (A45) for damage

Remove steering angle sensor (N49) for this step.

AR46.10-P-0300P

Visual inspection, if necessary replace fanfare horns and airbag clock spring contact (A45)

5

Install in the reverse order

Odkazované dokumenty