Remove/install clock spring contact

AR46.10-P-0200GS

Remove/install clock spring contact

3.6.02

 

Remove/install

1

Remove steering wheel

 Installation: Replace countersunk screw.

AR46.10-P-0100P

2

Only unscrew the bolts (32h) until the fanfare horns and airbag clock spring contact (A45) can be pulled off

 The bolts (32h) act as both an anti-rotation device and an assembly aid.

3

Carefully pull fanfare horns and airbag clock spring contact (A45) off steering column switch module

 Installation:

On model 463 up to 30.06.02:

Push on the fanfare horns and airbag clock spring contact (A45) as far as the stop.

 Installation:

On model 463 as of 1.07.02:

Insert the fanfare horns and airbag clock spring contact (A45) carefully otherwise the contact pins (1) may be damaged.

 Installation:

Do not install the fanfare horns and airbag clock spring contact (A45) twisted otherwise it will be damaged.

If the fanfare horns and airbag clock spring contact (A45) is twisted, its center position must be adjusted: 

Adjust center position of clock spring contact

AR46.10-P-0200-01I

4

Check fanfare horns and airbag clock spring contact (A45) for damage

 Perform visual inspection and replace the fanfare horns and airbag clock spring contact (A45) if necessary.

On model 463 up to 30.06.02:

Before a visual inspection of the fanfare horns and airbag clock spring contact (A45) can be performed, the steering angle sensor (B24/8) must be removed: 

Remove/install steering angle sensor

AR46.10-P-0300GS

5

Install in the reverse order

6

Activate steering angle sensor (B24/8)

Model 463.244/245/247/248/250/254/
309/332/333 as of 30.9.01

Model 463.243/246/249/322/323

AR46.10-P-0300-01I