P46.10-2423-07
32 Steering wheel
A45 Clock spring contact
32c Countersunk screw
| Remove/install | ||
1 | Move steering wheel (32) to horizontal position | Front wheels in straight-ahead position. | |
2 | Remove electronic ignition key | The electronic steering detent (ELV) engages. | |
3 | Remove airbag unit from steering wheel (32) | Vehicles up to 2.3.08 except code (809) Model year 2009. | |
Vehicles as of 3.3.08 or with code (809) Model year 2009. | |||
4 | Disconnect electrical connection of steering wheel heater on steering wheel (32) | Vehicles with code (443) Steering wheel heater. | |
5 | Remove countersunk screw (32c), steadying steering wheel (32). | Installation: Replace countersunk bolt (32c). | |
| |||
6 | Remove steering wheel (32), routing the electrical cables of the airbag unit through the opening in the steering wheel (32) | Installation: Align the cutout of the serrations in the steering wheel (32) with the marking on the steering shaft (arrow). | |
7 | Check the spiral contact coil (A45) for damage | Visual inspection, if necessary install new clock spring contact (A45): | |
Remove/install clock spring contact (A45) | |||
8 | Install in the reverse order | ||
| Checking | ||
9 | Conduct a road test | Tests during the road test: | |
Turn signal reset If displacement is more than one tooth, problem-free canceling of flashers is not guaranteed. | |||
Airbag indicator lamp The SRS indicator lamp must not light up when the steering is turned to full lock in both directions. | |||
Steering wheel position (32) If the steering wheel (32) is crooked, adjust it by max. one tooth. |
Steering wheel