ar4610d0200b

Remove/install clock spring contact

Typ ar · téma 46.10 · verze 0109 · 2011-10-18

Platí pro: MODEL 690.6, 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (SA5) Driver airbag MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 901.6, 902.6, 903.6 except CODE (SA5) Driver airbag with CODE (BB3) Electronic Stability Program

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 46 Řízení › 46.10 Volant, sloupek řízení, hřídel sloupku řízení, zámek řízení — Řada 690 (modely 6**) · Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.15 Síť/multifunkční systém › 25.15.18 Spínač/skupina spínačů/ovládací panel — Řada 690 (modely 6**) · Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

AR46.10-D-0200B

Remove/install clock spring contact

17.10.11

MODEL 690.6, 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (SA5) Driver airbag

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 901.6, 902.6, 903.6
except CODE (SA5) Driver airbag
with CODE (BB3) Electronic Stability Program

Remove/install clock spring contact

D46.10-1120-11

1 Steering column paneling

2 Electrical center

R5 Clock spring contact

X113 Horn clock spring contact connector

X125 Airbag clock spring contact connector

Remove/install

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag unit with deployment face up, do not subject to temperatures above
100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

1

Remove steering wheel

Except code SA5 Driver airbag

AR46.10-D-0100C

With code SA5 Driver airbag

AR46.10-D-0100D

2

Remove steering column cover (1).

3

Loosen electrical center (2)

Leave cable connectors as well as electrical lines connected.

4

Determine connector for horn clock spring contact (X113) in the area of the electrical center and disconnect

5

Determine connector for airbag clock spring contact (X125) in the area of the electrical center and disconnect

With code SA5 Driver airbag

6

Unscrew the bolts (arrows) until the clock spring contact (R5) can be removed

Do not unscrew bolts fully. The bolts act at the same time as an anti-twist guard and assembly aid.

7

Carefully take clock spring contact (R5) off steering column tube

Do not twist clock spring contact (R5) and do not disassemble. With twisted clock spring contact (R5) see:

Set the clock spring contact to center position

AR46.10-D-0200-01A

8

Install in the reverse order

Odkazované dokumenty