1 | Steering column |
2 | Steering wheel |
3 | Nut |
4 | Coverage |
(Seta) | Reference mark |
B46.10-0002-12
For vehicles with keys on the steering wheel |
5 | Steering wheel spiral |
6 | Bolt |
(Seta) | Electrical Connectors Alignment |
B46.40-0024-11
| Remove/install | ||
1 | Remove the cover (4) from the steering wheel (2) | ||
2 | Loosen the nut (3) from the steering column (1) | Installation: Check the reference markings (arrow) for aligning and installing the steering wheel (2) on the steering column (1). | |
.Steering attachment nut | |||
3 | Remove the steering wheel (2) | On vehicles with keys on the steering wheel (2), be careful not to damage the contact spiral (5) and its electric harness/connectors. | |
4 | Loosen the screws (6) and remove the contact spiral (2) | Type 382.111/123/15/17/18, 634.0 | |
Prevent that the contact spiral (5) exit from the zero position, fixing them with adhesive tape, thus maintaining the alignment of the electrical connectors (Arrow). | |||
Installation: Observe the mounting marking of the contact spiral (5). | |||
5 | Install on the reverse order |