ar4340d105002ad

Check power consumption of Telma retarder

Typ ar · téma 43.40 · verze 0100 · 2006-07-26

Platí pro: MODEL 668, 670 with CODE (BR3) CC 80 retarder

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 43 Vzduchotlaková část brzd a přídavné brzdy › 43.40 Retardér (elektrický) — Řada 668 · Řada 670

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.21 Retardér › 21.21.30 Skříň/víko/hřídel/retardér — Řada 668 · Řada 670

AR43.40-D-1050-02AD

Check power consumption of Telma retarder

Test values for retarder (electric)

Number

Designation

Model
668, 670 with
code BR3

BE43.40-N-1003-01B

Current per circuit

at 24 V and 20 °C

A

20 (20%)

at 12 V and 20 °C

A

40 (20%)

Commercially available tools

Number

Designation

WH58.30-Z-1001-09A

Multimeter

WH58.30-Z-1016-09A

Clamp-on probe

Check power consumption of Telma retarder

1 Remove cover from retarder relay box (A15).

Installation: Pay attention to the seal in the cover.

2 Clip current clamp with multimeter onto electrical wiring harness to retarder.

3 Press buttons on relays (1, 2, 3, 4) in sequence, and read off and note down measured values shown on multimeter.

The measured values must be within the tolerance.
If one of the measured values is outside the tolerance, the electrical connections should be disconnected from the retarder solenoids and each retarder solenoid must be measured separately.

D43.40-0010-03