Remove/install pressure sensor · ar4330t0018b · Mercedes-Benz WIS

AR43.30-T-0018B

Remove/install pressure sensor

8.6.11

MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

T43.30-0029-01

1 Pressure sensor

2 Oil reservoir cover

 	Remove/install
1	Detach electrical line from pressure sensor (1)
2	Remove pressure sensor (1) from oil reservoir cover (2)		*BA43.30-N-1015-01D
3	Install in the reverse order
4	Check/correct retarder oil level		AP43.30-T-4310CA
5	Conduct a road test	 Bleed retarder: -If present and possible, switch off retarder foot control. -Drive vehicle at 50 km/h. -Switch on retarder in first brake stage 5 times for approx. 5 seconds each.

 Retarder (hydraulic)

Number	Designation			Model 613 with code B10


BA43.30-N-1015-01D	Pressure sensor to top of oil reservoir cover	M161.5	Nm	30

Odkazované dokumenty

ap4330t4310ca