1 | Retaining ring |
2 | Silencer disk |
3 | Sinous spring |
T43.30-0014-11
Warning | Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure | Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder. | |
| Remove | ||
1 | Remove retaining ring (1) | Observe the assembly position of the retaining ring (1). | |
2 | Remove silencer disk (2) | ||
3 | Remove sinous spring (3) | ||
| Clean | ||
4 | Clean silencer disk (2) with benzine and then blow out with compressed air | Pure benzine/benzine 100/140 (free of aromatic compounds) | |
| Install | ||
5 | Install sinous spring (3) | ||
6 | Install silencer disk (2) | ||
7 | Install retaining ring (1) | Observe the assembly position of the retaining ring (1). |
Odkazované dokumenty
- as4330z000101a Nebezpečí poranění při dotyku s horkým retardérem a při opaření horkým olejem z retardéru. Nebezpečí poranění kůže a očí olejem retardéru vystřikujícího vlivem vysokého tlaku