ar4260y0072ind

Remove/install separate compressed-air reservoir

Typ ar · téma 42.60 · verze 0105 · 2019-10-23

Platí pro: Model 831.001/002/005

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.60 Vzduchotlaková část — Řada 831 (modely 001, 002, 005)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.35 Vzduchotlaké zařízení › 21.35.30 Vysoušení/regulace/čistění — Řada 831 (modely 001, 002, 005)

AR42.60-Y-0072IND

Remove/install separate compressed-air reservoir

23.10.2019

Model

831.001/002/005

Remove/install separate compressed-air reservoir

Purge tank removal and installation procedure

1

Air dryer to purge tank connecting hose lock nut

2

Purge tank

Y42.60-0053-04

Remove/install

1

Secure vehicle against rolling.

Release the air from the primary and secondary reservoir before starting the removal procedure.

2

Remove air drier to purge tank connecting hose lock nut (1).

3

Remove purge tank (2) mounting bolt from chassis.

Installation:
Always wind the hose lock nut with teflon tape before installation.
Failure to do lead in air leakage and system failure.

Installation: Ensure that the O-rings and seating locks are free from wear and damage while installation.

If found damaged,

replace with new O-rings.

4

Install in the reverse order.

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Charge air brake system.

Allow the engine to run until the operating pressure of the air brake system is reached.

Odkazované dokumenty