I42.60-0046-01
1 Pull boot (1) off upper part of housing (2).
2 Mark position of upper part of housing (2) in relation to valve block (3) (arrows).
3 Remove bolts (5).
4 Remove upper part of housing 92) and intermediate plate (4).
I42.60-0047-01
5 Remove roll pin (6).
Use 3 mm plunger.
6 Pull lever (8) and boot (1) upwards, pull out bolt (7) and remove cam (10) with spring (9) and guide sleeves (11).
I42.60-0048-01
7 Detach console (12) from lower part of housing (3).
I42.60-0049-01
8 Remove roller (13) from lower part of housing (3).
9 Detach cover (14), remove intermediate plate (15), gasket (16), spring guide (17), and spring (18) from lower part of housing (3).
I42.60-0050-01
10 Remove piston (19), spring (20), and plunger (21) from lower part of housing (3).
11 Remove sealing ring (22) from plunger (21).
I42.60-0051-01
12 Unscrew lower part of piston (19.1) from upper part of piston (19.2).
24 Sealing ring
25 Washer
26 Spring
27 Valve
28 Sealing ring