Shown with code A54 (Preparation of auxiliary steering) |
1 | Pressure limiting valve |
2 | Thrust ring |
3 | O-ring |
G42.60-A000-12
Shown without code A54 (Preparation of auxiliary steering) |
1 | Pressure limiting valve |
2 | Thrust ring |
3 | O-ring |
G42.60-A001-12
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury from cutting pressurized compressed air lines | Wear protective gloves and safety glasses | |
| Remove/install | ||
1 | Reduce pressure of compressed-air system by actuating the brake pedal several times. | ||
2 | Remove pressure limiting valve (1). | Installation: Install new pressure limiting valve (1); replace thrust ring (2) and O-ring (3). | |
Pressure limiting valve to threaded fitting | |||
3 | Install in the reverse order | ||
4 | Start engine, fill compressed-air system and switch off engine before reaching the shutoff pressure. | Pressure regulator shutoff pressure | |
5 | Check pressure limiting valve (1) for leak tightness using leak detection spray. | Leak location spray LUBRION article no. 626.04 | |
If problems occur, | |||
| |||
Retighten pressure limiting valve (1). |
Odkazované dokumenty
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru
- as4300z000101a Nebezpečí poranění při odpojení tlakovzdušných potrubí pod tlakem