AR42.60-B-0010C | Checking pressure governor | 12.02.16 |
Vehicle 688 with Cumbustion engine 374.990, 374.994, 374.977, 374.976, 374.950, 304.900, 374.989, 374.991, 374.996, 904.924, 904.957, 374.979, 904.908
B42.60-0351-06
1 Cap
2 Blind cap
3 Instrument cluster
4 Bolts
5 Compressed air line
6 Nut of the connector tube to the body
7 Parking brake valve
8 Blind cap
9 Bolts with washers
10 Speedometer cable
| Remove and install | ||
1 | Release pressure from the pneumatic system | ||
2 | Remove the covers (1, 2) from the instrument cluster (3) | ||
3 | Unscrew the bolts (4) and lift the instrument cluster (3) | ||
4 | Detach the speedometer cable (10) | ||
5 | Mark the compressed air pipes (5) of the perking brake valve (7) | ||
6 | Unscrew the nuts (6) and remove the pneumatic lines (5). | Installing: Observe the markings made at disassembly, to coincide with the respective connections. Check the pipe connections for leaks and, if necessary, replace them. | |
Apply the specified torque to the connector tube nut to the body. | |||
| |||
7 | Remove the cover (7) and unscrew the bolts with washers (8) | Installing: Apply the specified tightening torque to the screws. | |
| |||
8 | Remove the parking brake valve (6) | ||
9 | Install in reverse order |
Brake hoses, brake lines
Número | Denominação | chassis 364, 382, 384, 386, 388, 397, 660, 664, 682, 688, 693, 694, 695, 696 | |||
BA42.10-B-1001-14B | Nut of the connector tube to the body | Nm | 10 | ||
Parking brake