ar4230d8550a

Remove/install ABS control unit

Typ ar · téma 42.30 · verze 0103 · 2012-05-04

Platí pro: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (BB0) Antilock brake system (ABS) MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (BB3) Electronic Stability Program

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.30 Protiblokovací systém (ABS) — Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

EinPAS 26 Systémy aktivní bezpečnosti › 26.20 Regulace brzd/ trakce › 26.20.11 Řídicí jednotka/relé — Řada 901 (modely 6**) · Řada 902 (modely 6**) · Řada 903 (modely 6**) · Řada 904 (modely 6**) · Řada 905 (modely 6**)

AR42.30-D-8550A

Remove/install ABS control unit

27.4.12

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (BB0) Antilock brake system (ABS)

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (BB3) Electronic Stability Program

Remove/install ABS control unit

D42.45-0011-06

1 Hydraulic unit

2 ABS control unit

3 Clutch

4 Cap

5 Internal Torx bolt

Remove/install ABS control unit

D42.45-0012-01

Tightening procedure

5 Internal Torx bolt

Remove/install

Important notes concerning repair work on the antilock brake system (ABS)

Model 638, 901, 902, 903, 904, 905 with code BB0 or BB3

AH42.30-N-0002-01A

Notes on replacing ABS/ABD or ABS/ETS control unit

Model 638, 901, 902, 903, 904, 905 with code BB0 or BB3

AH42.30-N-8601-04A

Specifications for control unit

It is absolutely essential to observe all the notes and instructions in the accompanying information on the control unit!

1

Ignition OFF

2

Pull cover cap (3) off ABS control unit (2)

3

Release connector (3) and disconnect from ABS control unit (2)

4

Unscrew bolts (5) at control unit

Installation: Replace bolts (5). Tightening procedure must be followed when inserting and tightening bolts.

*BA42.30-N-1004-03A

5

Detach ABS control unit (2) from hydraulic unit (1) to the front

Installation: The sealing surface on the hydraulic unit must be free of dust, grease and dirt.

6

Install in the reverse order

7

Perform quick test

STAR DIAGNOSIS

8

Parameterize ABS control unit

STAR DIAGNOSIS

Menu item: Control unit adaptations

Hydraulic unit

Number

Designation

Models
690.6, 901.6,
902.6, 903.6,
904.6, 905.6
with ABS/ABD,
code BB0

BA42.30-N-1004-03A

Bolt, control unit to hydraulic unit

Stage 1

Nm

2,9 0,3

Stage 2

°

-

Maximum

Nm

-

Stage 3

Nm

-

Odkazované dokumenty