Remove/install ABS/ABD control unit on the hydraulic unit · ar4230d8252a · Mercedes-Benz WIS

AR42.30-D-8252A

Remove/install ABS/ABD control unit on the hydraulic unit

27.4.12

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (BB0) Antilock brake system (ABS)

D42.30-0009-06

1 Hydraulic unit

2 ABS/ABD control unit

3 Bolt M6

4 Adapter bolt M6

5 Bolt M6

 	Remove/install
	Important notes concerning repair work on the antilock brake system (ABS)	Model 638, 901, 902, 903, 904 with code BB0	AH42.30-N-0002-01A
	Notes on replacing ABS/ABD or ABS/ETS control unit	Model 638, 901, 902, 903, 904 with code BB0	AH42.30-N-8601-04A
	Specifications for control unit	It is absolutely essential to observe all the notes and instructions in the accompanying information on the control unit!
1	Disconnect ground cable at battery	 The ignition must be switched off.
2	Detach connector on ABS/ABD control unit		AR42.30-D-8252-03A
3	Remove ABS/ABD control unit		AR42.30-D-8252-01A
		 Installation	AR42.30-D-8252-02A
			*000589011000
			*001589802100
			*BA42.30-N-1001-03A
			*BA42.30-N-1004-03A
			*BA42.30-N-1005-03A
4	Install in the reverse order
5	Carry out test program	See Diagnosis Manual Volume 2 Transporter Sprinter

 Hydraulic unit

Number	Designation			Model 901.0/3/4, 902.0/3/4 903.0/3/4 904.0/3/4 with ABS/ABD, Code BB0	Models 690.6, 901.6, 902.6, 903.6, 904.6, 905.6 with ABS/ABD, code BB0


BA42.30-N-1001-03A	Bolt/nut, hydraulic unit to bracket	M6	Nm	10	6
BA42.30-N-1004-03A	Bolt, control unit to hydraulic unit	Stage 1	Nm	2,9	2,9 0,3
		Stage 2	°	90	-
		 Maximum	Nm	8	-
		Stage 3	Nm	-	-
BA42.30-N-1005-03A	Adapter bolt to control unit/hydraulic unit	M6	Nm	15	-

000 589 01 10 00

001 589 80 21 00

Torque screwdriver

Internal Torx set

ah4230n000201a Důležité pokyny k opravárenským pracím u protiblokovacího systému (ABS)
ah4230n860104a Pokyny k výměně řídicí jednotky ABS/ABD nebo ABS/ETS
ar4230d825201a
ar4230d825202a
ar4230d825203a