S42.20-0013-06
1 Brake release lever
2 Brake release lever bracket
3 Contact switch
4 Bowden cable
5 Retaining clamp
6 Front pedal cable bracket
7 Plastic ring
8 Side retaining clamp of operating lever
9 Actuating lever
10 Claw
11 Claw return spring
12 Parking brake brake cable
13 Parking brake pedal
14 Gripper tooth
15 Screw
16 Stop roller and stop washer
17 Jam nut
18 Bolts of operating lever bracket
19 Side bolts of operating lever bracket
20 Bolts of operating lever bracket to body
21 Fastening of brake release lever at operating lever
22 Cable fastening on the body
23 Retaining plate
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between pillars of lifting platform and position four support plates at lift mounting points specified by vehicle manufacturer. | |
| Special instructions for lifting and supporting vehicle | Model 638 | |
1 | Raise vehicle | ||
2 | Release parking brake | ||
3 | Unhook cable (4) from brake release lever (1) | ||
4 | Remove brake release lever bracket (2) | ||
5 | Unhook brake cable (12) at bracket (6) | ||
6 | Unclip vinyl ring (7) from brake cable (12) | Unclip vinyl ring (7) from the cable guide using the special tool. Replace damaged vinyl ring (7). | |
Clip remover | |||
7 | Remove retaining clamp (5) and detach parking brake pedal (13) | Installation: Grease anchor pin lightly with long-life grease. | |
Silicone grease | |||
8 | Separate connector from contact switch (3) | ||
9 | Unscrew jam nut (17) and remove contact switch (3) | ||
10 | Unscrew bolt (15) | | |
11 | Remove Bowden cable (4) at retaining plate (23) | ||
12 | Remove claw (10) and operating lever (9) | ||
13 | Remove retaining plate (23) and parking brake pedal | The retaining plate (23) of the parking brake can be removed and installed both individually and also together with all other components. | |
| |||
14 | Install in the reverse order | ||
15 | Adjust parking brake |
Parking brake
Number | Designation | Model 638 | ||
BA42.20-N-1002-01B | Bolt, pedal stop | Nm | 7.5 | |
BA42.20-N-1003-01B | Bolt, pedal bracket | Nm | 27 | |
129 589 11 63 00
Snap-release tool
Repair materials
Number | Designation | Order number |
BR00.45-Z-1019-06A | ABS sensor grease | A 000 989 62 51 10 |
Odkazované dokumenty
- ah0060n010001a Upozornění pro nadzvednutí a podepření
- ar4220s051001a
- ar4220s051002a
- ar4220s051003a
- ar4220s054001a
- as0000z001001a Nebezpečí ohrožení života v případě sesunutí nebo překlopení vozu z dílenského zvedáku