Remove/install right rear brake line

AR42.10-P-0037MCC

Remove/install right rear brake line

10.11.11

 

Remove/install

Danger!

Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A



Brake fluid notes

AH42.50-P-0001-01A



Notes on repairs to brake system

AH42.00-P-0003-01A

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift vehicle with vehicle lift and remove rear underfloor paneling

Cordless drill/driver, cordless drill
gotis://G_58.0_01.1

2

Remove bulkhead wall

In model 451.4

AR61.25-P-6600MCC

3

Check bolted connections of brake line (1) with brake hose (2) and wheel brake cylinder (3) for color coding

 Installation: Identify the brake line (1) accordingly.

AR42.10-P-0013-05MCC

4

Undo bolted connections of brake line (1) and detach brake hose (2) and the wheel brake cylinder (3)

 Collect brake fluid in a suitable container. Seal connections using suitable plugs.

 InstallationDo not bend brake line (1), pay ATTENTION to routing, leaktightness and clearance.



*BA42.10-P-1002-04E



*BA42.10-P-1003-04E



*450589099904

5

Unclip retaining clip (4) of electrical line (5) on brake line (1)

6

Unclip brake line (1) from brackets (6) on axle tube (7)

7

Remove brake line (1)

8

Replace brake line (1).

Only if the brake line (1) with the red color coding has been detached.

9

Install in the reverse order

10

Bleed brake system

AR42.10-P-0010MCC

Number

Designation

Model 451.3/4

BA42.10-P-1002-04E

Brake pipe to brake hose

Nm

16

BA42.10-P-1003-04E

Brake line to rear wheel brake cylinder

Nm

16