N42.10-2192-12
1 Rivet
2 Brake pad
3 Brake shoes
| Remove/install | ||
1 | Remove front brake shoes | Only when replacing the brake linings (2) on the front axle. | |
2 | Remove brake shoes at rear axle. | Only when replacing the brake linings (2) on the rear axle. | |
3 | Drill off rivets (1) and remove brake lining (2) from brake shoes (3) | Installation: All the brake linings (2) on an axle must always be replaced at once. | |
4 | Check contact surface of brake shoes (3) for signs of wear, if necessary replace brake shoes (3) | ||
5 | Rivet on new brake linings (1) | ||
| Guidelines for riveting brake linings | ||
6 | Install in the reverse order |
Odkazované dokumenty
- ah4210n000601a Předpisy k nýtování brzdového obložení
- ar4210i0165b
- ar4210i1021b