ar4210g0010f

Bleed brake system

Typ ar · téma 42.10 · verze 0100 · 2010-10-18

Platí pro: MODEL 000.001 with FRONT AXLE 737.910 with REAR AXLE 747.911

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.10 Provozní brzda — Řada 000 (modely 001)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.15 Provozní brzda/podtlakový systém › 21.15.5 Kompletní brzdová soustava — Řada 000 (modely 001)

Platí také pro motory/převodovky: 737 910, 747 911

AR42.10-G-0010F

Bleed brake system

11.10.10

MODEL 000.001 with FRONT AXLE 737.910 with REAR AXLE 747.911

Bleed brake system

G42.50-3112-01

Shown on left brake caliper

1 Brake fluid receptacle

2 Hose

3 Vent valve

Bleeding

Danger!

Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Notes on repairs to brake system

All models

AH42.00-P-0003-01A

Brake fluid notes

All models

AH42.50-P-0001-01A

1

Connect filler and bleeder unit to brake fluid reservoir, and apply specified pressure to the brake system

See:

Vehicle operator's manual or repair instructions.

Note operating instructions for filler/bleeder unit.

To avoid any damage to the brake system, brake fluid that complies with the Specifications for Operating Fluids must be used.

Brake fluids (DOT 4 plus)

Sheet 331.0

BB00.40-P-0331-00A

2

Connect hose (2) of receptacle (1) to vent valve (3) of left front axle

Carry out the bleeding procedure at all brake calipers at each hub drive.

3

Open vent valve (3) by one or two turns

Leave the bleed valve (3) open until the brake fluid escapes free of bubbles and without contaminants (bright color of brake fluid).

4

Close the bleed valve (3)

5

Perform bleeding process on brake calipers on right front axle, left rear axle and right rear axle

Repeat operation steps 2 to 4 on all brake calipers per hub reduction gear.

6

Inspect braking system for proper operation and leaks

7

Detach filler and bleeding unit

Pay attention to manufacturer's operating instructions.

8

Check brake fluid level, correct if necessary

See:

Vehicle operator's manual or repair instructions.

Odkazované dokumenty