ar4210d0301b

Removing and installing brake fluid reservoir

Typ ar · téma 42.10 · verze 0103 · 2003-09-12

Platí pro: MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.10 Provozní brzda — Řada 903 (modely 61*, 62*, 66*, 67*) · Řada 904 (modely 61*, 62*, 66*)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.15 Provozní brzda/podtlakový systém › 21.15.30 Hlavní brzdový válec/nádrž/posilovač brzd — Řada 903 (modely 61*, 62*, 66*, 67*) · Řada 904 (modely 61*, 62*, 66*)

AR42.10-D-0301B

Removing and installing brake fluid reservoir

29.1.01

MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Removing and installing brake fluid reservoir

D42.10-1110-06

1 Reservoir

2 Cap

3 Brake fluid level indicator connector

4 Master brake cylinder

Remove/install

Danger!

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid.

Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Notes on brake fluid

All models

AH42.50-P-0001-01A

Notes on repairs to brake system

All models

AH42.00-P-0003-01A

1

Suction off brake fluid from the storage reservoir (1)

2

Brake fluid indicator

Disconnect electrical connector

3

Remove reservoir

Bend catches (arrows) up and pull off reservoir; if re-used, clean reservoir with methylated spirits.

Seal connection bores on master brake cylinder with plugs. Replace plugs
for reservoir (2).

5

Bleed brake system

AR42.10-D-0010B

6

Adjust fluid in reservoir to correct level

AP42.50-D-4210B

Check brake system for leaks

Odkazované dokumenty