AR42.10-D-0015D | Checking braking system for leaks using pressure gauge | 26.1.01 |
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (J61) Test connection hydraulic brake
MODEL 903.61 /66 /67, 904.61 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU7) National version for Canada
MODEL 903.61 /66 /67, 904.61 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU8) National version for USA
MODEL 903.61 /62 /66 /67, 904.61 /62 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU9) National version for Mexico
D42.10-0004-05
1 Test connection for uncontrolled brake pressure
2 Front axle brake caliper
3 ALB controller
4 Test connection, brake pressure controlled
5 Rear axle brake caliper
Fig. item, etc. | Notes on the work | ||
Danger! | Risk of accident. Accidents may result if the vehicle starts off unintentionally with the engine running. Risk of injury. Crushing and burn injuries may result while working on engine during when it is being started or when it is in operation. | Secure vehicle to prevent it from moving. | |
Danger! | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid. | Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Notes on brake fluid | All models | |
| Notes on repairs to brake system | All models | |
| Notes on checking brake system for leaks | ||
| Connect test line to master brake cylinder | ||
Pressure tester | |||
| Perform low-pressure and high-pressure check on brake system | ||
| |||
Test values for low-pressure check | |||
Test values for high-pressure check | |||
| Check fluid level in reservoir and correct if necessary |
Test values for brake system hydraulics
Number | Designation | Models | Models | ||
BE42.50-N-1001-01A | Low-pressure check on brake system | Test pressure | bar | 2...5 | 2...5 |
Duration of test | min | 5 | 5 | ||
Max. pressure drop | % | - | - | ||
BE42.50-N-1002-01A | High-pressure check on brake system | Test pressure | bar | 50...100 | 50...100 |
Duration of test | min | 10 | 10 | ||
Max. pressure drop | % | 10 | 10 | ||
000 589 18 31 00
Brake pedal winch
Commercially available tools
Odkazované dokumenty
- ah4200p000301a Pokyny k opravám brzdové soustavy
- ah4210n000101a Pokyny ke zkoušce těsnosti brzdové soustavy
- ah4250p000101a Upozornění k brzdové kapalině
- ap4250d4210b
- ar4210d001502a
- ar4210d001503a
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru
- as4250z000101a Nebezpečí otravy při požití brzdové kapaliny. Nebezpečí poranění při kontaktu brzdové kapaliny s kůží a očima