ar4210d001005a

Bleed brake system with bleeder unit and with manual assistance

Typ ar · téma 42.10 · verze 0117 · 2009-11-23

Platí pro: MODEL 901, 902, 903 MODEL 901, 902, 903, 904, 905 with CODE (BB0) Antilock brake system (ABS) MODEL 690.611 /63 /64 MODEL 690.6 with CODE (BB0) Antilock brake system (ABS)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.10 Provozní brzda — Řada 690 (modely 6**, 611, 63*, 64*) · Řada 901 · Řada 902 · Řada 903 · Řada 904 · Řada 905

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.15 Provozní brzda/podtlakový systém › 21.15.5 Kompletní brzdová soustava — Řada 690 (modely 6**, 611, 63*, 64*) · Řada 901 · Řada 902 · Řada 903 · Řada 904 · Řada 905

AR42.10-D-0010-05A

Bleed brake system with bleeder unit and with manual assistance

Front axle brake caliper

Number

Designation

Model 690.6

Models
901, 902, 903

Model 904

Model 905

BA42.10-N-1002-10A

Bleed screw to brake caliper

M101

Nm

16

16

16

16

Rear axle brake caliper

Number

Designation

Model
690.6

Model
901, 902

Model
903

BA42.10-N-1003-12A

Bleed screw to brake caliper

M101

Nm

16

16

16

Rear axle brake caliper

Number

Designation

Model
904

Model
905

BA42.10-N-1003-12A

Bleed screw to brake caliper

M101

Nm

16

16

Bleed brake system with bleeder unit and with manual assistance

D42.10-0043-05

1 First bleeder position right rear

2 Second bleeder position left front

3 Third bleeder position rear left

4 Fourth bleeder position right front

01 Bleeder unit

Shown on model 901-903

Bleed brake system with bleeder unit and with manual assistance

D42.10-0014-01

1 Fix ALB controller at full-load position.

The ALB controller must be secured with Panduit tape or wire in the full-load position due to pressure peaks which interfere with the bleeding procedure.

Bleed brake system with bleeder unit and with manual assistance

D42.10-0018-01

2 Connect bleeder unit to the reservoir and open shutoff cock (01).

Bleed brake system with bleeder unit and with manual assistance

D42.10-0017-01

A Bleed primary brake circuit

3 Begin bleeding operation at the right rear, then at left front.
Fit bleeder hose onto the bleeder valve for this purpose and open bleeder valve.
In addition, depress brake pedal sharply every 23 seconds and allow to move back slowly.

The bleeding operation is completed once clear brake fluid free of bubbles flows out of the bleeder hose.

4 Close bleeder valve .

B Bleed secondary brake circuit

5 Begin bleeding operation at the rear left, then at right front.
Fit bleeder hose onto the bleeder valve for this purpose and open bleeder valve. In addition, depress brake pedal sharply every 23 seconds and allow to move back slowly.

The bleeding operation is completed once clear brake fluid free of bubbles flows out of the bleeder hose.

6 Close bleeder valve .

Bleed brake system with bleeder unit and with manual assistance

D42.10-0016-01

7 Close shutoff cock (01) and disconnect bleeder unit.

8 Adjust fluid in reservoir to correct level.

Fill quantity of brake fluid required, use brake fluid in accordance with Specifications for Operating Fluids, sheet 331.0.

9 Remove Panduit tape or wire at ALB controller.