Front axle brake caliper
Número | Denominação | Front axle 732.510/561; 733.840/882 | |||
BA42.10-B-1004-10A | Brake caliper guiding bearing bolts | Hydro-vacuum brake | M12x1.5 | Nm | 100...115 |
Hydro-vacuum brake | M16x1.5 | Nm | - | ||
Pneumatic brake | M16x1.5 - first stage | Nm | - | ||
M16x1.5 - second stage | degrees | - | |||
Brake mechanical system
Número | Denominação | Front axle 732.510; 732.561; 733.840 and rear axle 743.480 | |||
BA42.15-B-1001-01A | Dampening spring bolts of the brake pads | Nm | 9...12 | ||
B42.10-0405-01
1 Remove the wear sensors (4) from the brake pads (5)
Warning: Do not disconnect them from the cables.
B42.10-0406-01
2 Loosen bolts (2) and remove the damping springs (3) from the brake pads (5)
Install: Check the tension of the damping spring and replace the bolts applying the specified torque.
3 Remove the brake pads (5)
Install: Check the brake pads' condition and replace, if necessary, installing them only after the assembly of the new guide bearing.
4 Remove the guide bearing (1)
Install: Replace the guide bearing, applying the specified torque to the cylindrical bolts.