Represented on driven axle |
1 | Bolt |
2 | Support |
3 | Protection plate |
4 | Brake shoe |
5 | Return spring |
6 | Return spring |
7 | O-Ring |
8 | Brake shoe |
9 | Bolt |
10 | Pin lock |
11 | Shoe pin |
12 | Pliers for brake spring |
W42.10-0053-06
Topical note | Notes on self-locking nuts and bolts | ||
| Remove | ||
1 | Remove the brake drum | ||
2 | Remove the bracket (2) | ||
3 | Remove the protective plates (3) | ||
4 | Disengage the return springs (5, 6) | ||
5 | Remove the pins locks (10) | ||
6 | Remove the brake shoes pins (11) | ||
7 | Remove the brake shoes (4, 8) | ||
8 | Remove the O-Rings (7) | ||
| Install | ||
9 | Install new O-Rings (7) in the brake shoes (4, 8) | ||
10 | Install the brake shoes (4, 8) in the brake support | ||
11 | Install the brake shoe anchor pins (11) | ||
Plate fastening - shoe pin's lock | |||
Long-life grease | |||
12 | Install the return springs (5, 6) with the brake shoe spring pliers (12) | The elbows of the return springs (5, 6) should point to the support tube of the axle. | |
13 | Machine the brake drum diameter to suit the new brake linings | Only when the brake linings have been replaced. | |
14 | Install the protective plates (3) | Fastening of the protective plate | |
15 | Install the bracket (2) | ||
16 | Install the brake drum |
Odkazované dokumenty
- ah0000n000101a Upozornění k samopojistným šroubům a maticím
- ar4210b1010he
- ar4210b102001he
- ar4210b102002he