Propeller shaft
Number | Designation | Model | Model | ||
BA41.10-P-1002-01B | Bolt, propeller shaft to transmission flange | Nm | 35 | 35 | |
001 589 66 21 00
Torque wrench
Open-end wrench bit 13 mm
000 589 10 99 16
P28.50-2092-01
Detach propeller shaft to front axle
1 Place manual transmission in neutral and shift transfer case into "S".
2 Raise left front wheel.
3 Detach propeller shaft (arrow) to front axle, turning the left front wheel in the process.
4 Tie up the propeller shaft to one side.
P41.10-2023-01
5 Shift the manual transmission into neutral and transfer case into "N".
6 Detach propeller shaft (arrow), turning the propeller shaft in the process.
7 Tie up the propeller shaft to one side.
P28.10-2083-01
Detach propeller shaft to rear axle
8 Shift the manual transmission into neutral and transfer case into "N".
9 Detach propeller shaft (arrow) to rear axle, turning the left rear wheel in the process.
10 Tie up the propeller shaft to one side.
P28.50-2111-01
11 Install in the reverse order
Installation:
Always use new self-locking nuts for attaching the propeller shafts
Turn yellow marking on the flanges upwards
Connect propeller shaft to the front axle, transmission and rear axle to the transfer case, ensure that the arrows of the propeller shaft are at the top and fit the bolts loosely
When tightening the first bolt the arrow on the propeller shaft must be at the top. The other bolts must be tightened in a crosswise pattern