ar4030p0450p
Measure front axle carrier (when removed)
Typ ar · téma 40.30 · verze 0106 · 2007-10-09
Platí pro: MODEL 203, 171 (except 203.081 /084 /281 /284 /087 /092 /287 /292) MODEL 209.3 except CODE (P98) Black Series MODEL 209.4
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.30 Měření po nehodě — Řada 171 · Řada 203 (modely 004, 006, 007, 008, 016, 018, 020, 035, 040, 042, 043, 045, 046, 052, 054, 056, 061, 064, 065, 076, 204, 206, 207, 208, 216, 218, 220, 235, 240, 242, 243, 245, 246, 252, 254, 256, 261, 264, 265, 276, 706, 707, 708, 718, 730, 731, 735, 740, 741, 742, 743, 745, 746, 747, 752, 756, 764) · Řada 209 (modely 3**, 4**)
EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 171 · Řada 203 (modely 004, 006, 007, 008, 016, 018, 020, 035, 040, 042, 043, 045, 046, 052, 054, 056, 061, 064, 065, 076, 204, 206, 207, 208, 216, 218, 220, 235, 240, 242, 243, 245, 246, 252, 254, 256, 261, 264, 265, 276, 706, 707, 708, 718, 730, 731, 735, 740, 741, 742, 743, 745, 746, 747, 752, 756, 764) · Řada 209 (modely 3**, 4**)
AR40.30-P-0450P
| Measure front axle carrier (when removed)
| 2.11.00
|
MODEL 203, 171 (except 203.081 /084 /281 /284 /087 /092 /287 /292)
MODEL 209.3 except CODE (P98) Black Series
MODEL 209.4
| Measure
|
|
|
1
| Set up Celette straightening bench modular members
| See set-up diagram for Celette straightening bench.
|
|
2
| Install and secure checking fixtures, in the mounting bores of the Celette straightening bench
| We recommend measuring the front axle carrier on the vehicle concerned before and after work on the straightening bench.
|
|
3
| Place front axle carrier assembly (with front-axle half) or as separate part (as shown) rotated through 180° onto the test fixture
| The adjuster pins (arrows) on the modular member must be inserted into the reference bores in the front axle carrier.
| *BE40.30-P-1001-08A
|
4
| Install in the reverse order
|
|
|
Test values for front axle carrier
Number
| Designation
| Model 171
| Model 203
| Model 209
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BE40.30-P-1001-08A
| Maximum distance between contact surfaces of front axle carrier and checking fixture
| mm
| 2.5
| 2.5
| 2.5
|
