ar4020p033503gh

Check caster at rear axle using electronic inclinometer

Typ ar · téma 40.20 · verze 0104 · 2006-07-26

Platí pro: MODEL 163

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.20 Měření geometrie podvozku — Řada 163

EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 163

AR40.20-P-0335-03GH

Check caster at rear axle using electronic inclinometer

Wheel location

Number

Designation

Model Series 163

BA35.20-P-1005-07A

Locking slotted round nut, supporting joint to wheel carrier (replacement part)

NM

300

Check caster at rear axle using electronic inclinometer

Prong wrench

385 589 00 07 00

Workshop equipment

WE58.40-Z-1002-15A

Electronic clinometer

Check caster at rear axle using electronic inclinometer

P40.20-2019-01

1 Mount the adapter plate (086c) for electronic inclinometer on supporting joint and fix in position with knurled screw (arrow).

If a repair supporting joint is installed in the wheel carrier, unscrew locking slotted nut using a claw-type wrench and mount the adapter plate (086c) for the electronic inclinometer on the supporting joint.

The locking slotted nut must be replaced after it has been used once.

Check caster at rear axle using electronic inclinometer

P40.20-2020-01

2 Mount measuring sensor (086a) on adapter plate (086c) (inclinometer connecting cable (086) points in the direction of travel).

3 Compare caster actual value with specified value.