ar4020p020001ae

Determining specified caster value with nomogram

Typ ar · téma 40.20 · verze 0109 · 2012-09-26

Platí pro: MODEL 461 Wheelbase 3400 mm MODEL 461.331 Wheelbase 2850 mm MODEL 460, 461 Wheelbase 3120 mm

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.20 Měření geometrie podvozku — Řada 460 · Řada 461

EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 460 · Řada 461

AR40.20-P-0200-01AE

Determining specified caster value with nomogram

MODEL

461

Wheelbase 3400 mm

MODEL

461.331

Wheelbase 2850 mm

MODEL

460, 461

Wheelbase 3120 mm

Determining specified caster value with nomogram

1

Enter auxiliary dimension for rear axle (a) vertically into nomogram and at this point draw a line parallel to the existing lines.


2

Enter supplementary dimension for front axle (b) horizontally in the nomogram and at this point draw a vertical line.


3

Draw a horizontal line from the intersection point of the two lines and read off the specified caster value (c).

Nomogram for determining caster specified value (c) depending on spring travel for model 461.331 with wheelbase 2850 mm and all other models with wheelbases 3120 mm, 3400 mm

a

Supplementary dimension for rear axle

b

Supplementary dimension for front axle

c

Specified caster value

P40.20-2168-06