ar4020b034001ta

Measure steering axis inclination

Typ ar · téma 40.20 · verze 0300 · 2019-07-05

Platí pro: Model 958.0/1 with front axle 733.894/895 Model 958.184/186 with front axle 733.861 Model 958.2/4 with front axle 739.392 Model 958.20/25 with front axle 739.390 Model 958.260/264 with front axle 739.391 Model 958.43/44/45/46 with front axle 739.390 Model 958.471/472/478 with front axle 739.391 Model 958.472 with front axle 739.412

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.20 Měření geometrie podvozku — Řada 958 (modely 0**, 1**, 184, 186, 2**, 20*, 25*, 260, 264, 4**, 43*, 44*, 45*, 46*, 471, 472, 478)

EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 958 (modely 0**, 1**, 184, 186, 2**, 20*, 25*, 260, 264, 4**, 43*, 44*, 45*, 46*, 471, 472, 478)

Platí také pro motory/převodovky: 733 861, 733 894, 733 895, 739 390, 739 391, 739 392, 739 412

AR40.20-B-0340-01TA

Measure steering axis inclination

Model	958.0/1 with front axle 733.894/895
Model	958.184/186 with front axle 733.861
Model	958.2/4 with front axle 739.392
Model	958.20/25 with front axle 739.390
Model	958.260/264 with front axle 739.391
Model	958.43/44/45/46 with front axle 739.390
Model	958.471/472/478 with front axle 739.391
Model	958.472 with front axle 739.412

Modification notes

18.06.2019	Kingpin inclination		BE40.20-B-1002-11G
25.06.2019	Inclinação do pino mestre		BE40.20-B-1002-11G

Steering geometry

Number	Designation			Vehicles 934.2, 938.1, 958.2/4 with front axle 739.392	Vehicles 958.184/186 with front axle 733.861
BE40.20-B-1002-11G	Kingpin inclination	left hand side	°	5° (30')	9°30' (30')
		right hand side	°	5° (30')	9°30' (30')

Steering geometry

Number	Designation			Vehicles 958.20/43 4X2 with front axle 739.390	Vehicles 958.25/44/46 6X2 with front axle 739.390
BE40.20-B-1002-11G	Kingpin inclination	left hand side	°	7°15' (+15')	7°15' (+15')
		right hand side	°	7°45' (+15')	7°45' (+15')

Steering geometry

Number	Designation			Vehicles 958.45 6X4 with front axle 739.390	Vehicles 958.260/264 6X4 with front axle 739.391
BE40.20-B-1002-11G	Kingpin inclination	left hand side	°	7°15' (+15')	5° (30')
		right hand side	°	7°45' (+15')	5° (30')

Steering geometry

Number	Designation			Vehicle 958.472 6X4 with front axle 739.412	Vehicles 958.471/472/478 6X4 with front axle 739.391
BE40.20-B-1002-11G	Kingpin inclination	left hand side	°	5° (30')	5° (30')
		right hand side	°	5° (30')	5° (30')

Steering geometry

Number	Designation			Vehicles 958.03/07/09 with front axle 733.894/895
BE40.20-B-1002-11G	Kingpin inclination	left hand side	°	9°30' (30')
		right hand side	°	9°30' (30')

Measure steering axis inclination

Measure steering axis inclination

1	Position the projector (5) with the fastening pin to measure the expansion on the projector support (4).

2	Turn the wheel to the left on the rotating plate (3) by angle (a). a = 20°.

3	Place the projector (5) in the horizontal in vehicle longitudinal direction and tighten the wing screw.

W40.20-0039-01

W40.20-0034-01

Measure steering axis inclination

Measure steering axis inclination

4	Set the scale disc to measure expansion (33) to 0 on the wheel to be measured.

5	Turn the wheel to the right on the rotating plate (3) by angle (a) . a = 20°

W40.20-0040-01

W40.20-0035-01

Measure steering axis inclination

6	Turn the turning button (29) until the level is centered.

7	Read the measuring value off the scale disc for the measurement of expansion (33) (for ex. "expansion of the right wheel" 5°).

8	Record the measuring value on the alignment form.

9	Carry out the expansion measurement of the other wheel the same way

W40.20-0041-01