ar4020b034001a
Measure steering axis inclination
Typ ar · téma 40.20 · verze 0400 · 2020-05-26
Platí pro: Model 368.0/1, 382.111/123/15/17/18, 384.06/07/2/3, 386.0, 634.0 (except 634.08), 979.2
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.20 Měření geometrie podvozku — Řada 368 (modely 0**, 1**) · Řada 382 (modely 111, 123, 15*, 17*, 18*) · Řada 384 (modely 06*, 07*, 2**, 3**) · Řada 386 (modely 0**) · Řada 634 (modely 00*, 01*, 06*, 07*) · Řada 979 (modely 2**)
EinPAS 20 Podvozek › 20.10 Měření podvozku › 20.10.20 Diagnostika/zkouška/proměření/nastavení — Řada 368 (modely 0**, 1**) · Řada 382 (modely 111, 123, 15*, 17*, 18*) · Řada 384 (modely 06*, 07*, 2**, 3**) · Řada 386 (modely 0**) · Řada 634 (modely 00*, 01*, 06*, 07*) · Řada 979 (modely 2**)
AR40.20-B-0340-01A
| Measure steering axis inclination
|
|
|
Model
| 368.0/1, 382.111/123/15/17/18, 384.06/07/2/3, 386.0, 634.0 (except 634.08), 979.2
|
31.01.2019
| Kingpin inclination
|
| BE40.20-B-1002-11B
|
07.05.2020
| Kingpin inclination
|
| BE40.20-B-1002-11B
|
Number
| Designation
|
| Vehicle 382.111
| Vehicles 634.011/012/014/081 with front axle 739.386/397
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicle 384.065
| Vehicles 384.061/069
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicles 979.276/277 with front axle 732.560
| Vehicles 382.155/156/158/171/181/187/189
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 9° 30' (30')
| 6° (30')
|
Number
| Designation
|
| Vehicles 384.071/074/075/076/078
| Vehicles 382.153/154/157/176/177/178/182/185/188
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicle 384.063
| Vehicle 384.223
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicles 368.100/104/106 with front axle 732.796
| Vehicle 384.067 with front axle 732.797
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
| 5° (30')
|
Number
| Designation
|
| Vehicles 368.002/004 with front axle 739.916
| Vehicles 368.100/104 with front axle 739.916
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 6,25° (30')
| 6,25° (30')
|
Number
| Designation
|
| Vehicle 382.123
|
BE40.20-B-1002-11B
| Kingpin inclination
| °
| 5° (30')
|
The divergence measuring procedure (expansion) depends on the equipment. Refer to the operating manual of the respective equipment to be utilized.
1
| Position the projector (5) with the fastening pin for measuring the expansion on the projector support (4)
|
2
| Turn the wheel to the left on the rotating plate (6) by angle (a)
|
3
| Place the projector (5) horizontally in vehicle longitudinal direction and tighten the wing screw
|
4
| Set the scale ring to measure the expansion (33) to zero on the wheel to be measured
|
5
| Turn the wheel to the right on the rotating plate (6) by angle (a)
|
6
| Turn the button (29) until the level is centered
|
7
| Read out the indicated value on the scale ring to measure the expansion (33)
For example:
"right wheel expansion" 5º.
|
8
| Record the measuring value on the alignment form
.
|
9
| Carry out the expansion measurement of the other wheel the same way
|
