ar4010t102502a

Check tires for radial run-out

Typ ar · téma 40.10 · verze 0101 · 2007-07-06

Platí pro: MODEL 8AB390.053 /054, NMB613, 671

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.10 Kola, pneumatiky — Řada 390 (modely 053, 054) · Řada 613 · Řada 671

EinPAS 20 Podvozek › 20.30 Kolo/pneumatika › 20.30.30 Kolo/pneumatika/náhradní kolo — Řada 390 (modely 053, 054) · Řada 613 · Řada 671

AR40.10-T-1025-02A

Check tires for radial run-out

Test values for wheels, tires

Number

Designation

Model
390.053/054

Model 613

Model 671

BE40.10-N-1001-01D

Radial runout at tire
with rim dia.
(wheel mounted on vehicle)

22.5̋

mm

< 1,5

< 1,8

< 1,8

Check tires for radial run-out

W40.10-0006-01

1 Jack up vehicle at the front axle and secure with stands.

On model 613 the vehicle must not be raised at the middle longitudinal member otherwise serious damage to the frame can occur.

2 Set dial gauge (8) so that the measurement disc (43) is at the same height as the axle center.

3 Place measurement disc (43) as near as possible to tire center and turn wheel by hand.

The deflection of the measuring needle indicates the radial runout. One graduation line is equivalent to 1 mm.

4 Compare indicated value with specified value.

If the specified value is exceeded, rotate the tire on the rim (match) and repeat the measurement. If the specified value continues to be exceeded, check the wheel centering and replace the tire or the wheel if necessary.