Model | 461 |
with code I94 (265/70 R17.5 Street Terrain tyres) | |
with code I95 (265/70 R17.5 Mud Terrain tyres) | |
with code R86 (Spare wheel including run-flat system) | |
with code RF3 (Wheels 7.5Jx17,5") | |
except code 979 (Special protection MB Guard) | |
except code R91 (Omission of spare wheel/spare rim) | |
except code RY3 (Run-flat system) |
P40.10-7042-07
1 | Install spreader (1) on one of the areas (A, B, C,). |
In the example, in area (A). |
2 | Pry off tire sidewall from disk wheel. |
Weld in area (A) with . |
Pry off tire sidewall using spreader (1) only far enough to gain access to the threaded connections. |
3 | Remove bolt (2). |
Weld in area (A) with . |
4 | Remove retaining washer (3.1) and lock washer (4). |
Weld in area (A) with . |
5 | Remove bolt (5). |
Weld in area (A) with . |
6 | Remove retaining washer (3.2) and wedge (6). |
Weld in area (A) with . |
7 | Remove spreader (1) from area (A). |
8 | Repeat the preceding operation steps in areas (B) and (C) in the same sequence. |
9 | Remove three segments from run-flat tire ring (7). |
10 | Clean the three segments of the run-flat tire ring (7), check for condition and replace, if necessary. |