Remove/install wheels

AR40.10-I-1100A

Remove/install wheels

29.11.07

 

Remove/install

1

Secure vehicle to prevent it rolling away

2

Loosen all wheel nuts on rear axle

 Installation: Retighten the wheel nuts and wheel studs (1) to the specified tightening torque after the first 50 to 100 km in order to prevent the wheels from working loose unintentionally.

 The wheels nuts on the right side of the vehicle have a right-hand thread and the wheel nuts on the left side of the vehicle have a left-hand thread.

 Installation: Tighten the wheel nuts securely in a criss-cross pattern. Only tighten wheel nuts slightly using the impact wrench/driver and tighten to the specified tightening torque using the torque wrench.



*BA40.10-N-1001-01E



*000589392100

3

Jack up vehicle at rear axle

AR00.60-I-1000-03A

4

Remove all wheel nuts on rear axle

5

Detach outer twin wheels

6

Lower vehicle

7

Loosen allwheel studs (1) on rear axle

 Installation: The wheel studs (1) must be retightened after the first 50 to 100 km in order to prevent the wheels from working loose unintentionally.

 The wheel studs (1) on the right side of the vehicle have a right-hand thread and the wheel studs (1) on the left side of the vehicle have a left-hand thread.

 Installation: Tighten the wheel studs (1) in a crosswise sequence. Only tighten the wheel studs (1) slightly using the impact wrench/driver and tighten to the specified tightening torque using the torque wrench.



*BA40.10-N-1001-01E



*000589392100

8

Loosen all wheel nuts on front axle

 Installation: Retighten the wheel nuts and wheel studs (1) to the specified tightening torque after the first 50 to 100 km in order to prevent the wheels from working loose unintentionally.

 The wheels nuts on the right side of the vehicle have a right-hand thread and the wheel nuts on the left side of the vehicle have a left-hand thread.

 Installation: Tighten the wheel nuts securely in a criss-cross pattern. Only tighten wheel nuts slightly using the impact wrench/driver and tighten to the specified tightening torque using the torque wrench.



*BA40.10-N-1001-01E



*000589392100

9

Raise vehicle

 Raise the front axle.

AR00.60-I-1000-02A

 Raise the rear axle.

AR00.60-I-1000-03A

10

Remove all wheel nuts on front axle

11

Remove all wheel studs (1) on rear axle

12

Remove wheels



Check

13

Check tires for signs of damage and make sure that they are in good condition

 Replace, if necessary.

14

Check disk wheels

 Check for damage to the disk wheels, the condition of the rim flanges and the condition of the centering elements; replace if necessary.

15

Check allwheel nuts and wheel studs (1) for damage

 Replace, if necessary.

16

Install in the reverse order

Number

Designation

Model
397.243, 684.040/081/
083/088/091/
093/098/444/
449

BA40.10-N-1001-01E

Wheel nut to wheel stud

Nm

280