ar4010g102502b
Check tires for radial run-out
Typ ar · téma 40.10 · verze 0101 · 2015-09-25
Platí pro: Model 405.0/1/20/22 Model 437.4
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.10 Kola, pneumatiky — Řada 405 (modely 0**, 1**, 20*, 22*) · Řada 437 (modely 4**)
EinPAS 20 Podvozek › 20.30 Kolo/pneumatika › 20.30.30 Kolo/pneumatika/náhradní kolo — Řada 405 (modely 0**, 1**, 20*, 22*) · Řada 437 (modely 4**)
AR40.10-G-1025-02B
| Check tires for radial run-out
|
|
|
Model
| 405.0/1/20/22
|
Model
| 437.4
|
Check values for wheels, tires
|
Number
| Designation
|
|
| Model 405.0/1/20/22
| Model 437.4
|
BE40.10-N-1001-01F
| Maximum radial runout of tire for disk wheel Ø (wheel-and-tire assembly mounted on balancing machine or on vehicle)
| 20"
| mm
| 1,8
| 1,8
|
|
|
| 22.5"
| mm
| 1,8
| 1,8
|
|
|
| 24"
| mm
| 2,0
| 2,0
|
1
| Jack up vehicle at the front axle and secure with stands.
|
2
| Set dial indicator (1) so that the measurement disc (1.1) is level with the axle center.
|
3
| Place measurement disc (1.1) as near as possible to tire center and turn wheel and tire assembly by hand.
|
|
| Note operator's manual and scale graduation on dial indicator (1).
|
4
| Compare indicated value with specified value.
|
|
| If the specified value is exceeded, replace tire.
|
