ar3531p056002t

Driving out and driving in differential pin and roll pin

Typ ar · téma 35.31 · verze 0103 · 2009-02-11

Platí pro: Rear axle center assembly dia. 198 in MODEL 211.004 with CODE (450) Taxi version Rear axle center assembly dia. 198 in MODEL 171.456, 211.006, 211.054 /056 up to 31.5.06, 211.065 /082 /087 /092 /206, 211.254 /256 up to 31.5.06, 211.265 /282 /287 /292 /606, 219.356 up to 31.5.06, 230.467

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.31 Rozvodovka — Řada 171 (modely 456) · Řada 211 (modely 004, 006, 054, 056, 065, 082, 087, 092, 206, 254, 256, 265, 282, 287, 292, 606) · Řada 219 (modely 356) · Řada 230 (modely 467)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 171 (modely 456) · Řada 211 (modely 004, 006, 054, 056, 065, 082, 087, 092, 206, 254, 256, 265, 282, 287, 292, 606) · Řada 219 (modely 356) · Řada 230 (modely 467)

AR35.31-P-0560-02T

Driving out and driving in differential pin and roll pin

Driving out and driving in differential pin and roll pin

126 589 02 15 00

Assembly arbor

Driving out and driving in differential pin and roll pin

P35.31-0299-01

Removal:

1 Using a suitable drift, hammer roll pin (19) for the differential pinion shaft (16) out of the differential case (13).

2 Use assembly arbor to knock differential pinion shaft (16) out of differential case (13).

Installation

3 Use assembly arbor to knock differential pinion shaft (16) into differential case (13).

In the process pay attention to the bore for the roll pin (19).

4 Knock in new roll pin (19) until it is seated centrally in differential pinion shaft (16).